首页 > 产品中心 > PFA-可溶性聚四氟乙烯

Teflon PFA 945HP Plus - 科慕PFA代理

The Chemours Company Teflon® PFA 945HP Plus 全氟烷氧基

现货报价:185 5121 3137 谭经理

Teflon® PFA 945HP Plus
The Chemours Company
For inventory control purposes product name may be followed by an X.
Products labeled PFA 945HP Plus and PFA 945HP Plus X are equivalent and all information in this document is applicable to both.
Typical Application
With a typical MIT folding endurance of 800,000* cycles, Teflon ™ PFA 945HP Plus is designed to withstand repeated flexing and aggressive chemical stress-cracking agents. Applications for Teflon ™ PFA 945HP Plus include fluid handling components for high-performance chemical delivery systems, as well as tubing, unsupported pipe linings for the production of ultra-pure chemicals, and semiconductor components where purity in the parts-per-billion range is critical.
Teflon ™ PFA 945HP Plus is a premium fluoroplastic resin available in pellet form. Teflon ™ PFA 945HP Plus possesses the same exceptional chemical resistance, high purity, and protection against ionic contamination as Teflon ™ PFA HP grades with the added benefits of improved flex life (typical MIT flex of 800,000*) and chemical stress-crack resistance. Teflon ™ PFA 945HP Plus meets the increasingly stringent requirements for ultra-reliable and non-contaminating parts, as well as unmatched HCl permeation resistance. The improved flex life and chemical resistance will reduce the cost of ownership of high purity fluid handling systems by reducing downtime caused by mechanical or chemical stresses. Additionally, parts molded with Teflon ™ PFA 945HP Plus have improved clarity and a smooth finish, which can further help prevent buildup of microbial contamination in water handling systems. Table 1 shows the typical property data for Teflon ™ PFA 945HP Plus..
This special purpose resin has a mid-range melt flow rate (typical MFR of 7), which permits relatively high extrusion speed and easier processing. The enhanced resistance to environmental stress-cracking makes Teflon ® PFA 945HP Plus a preferred resin when extended service is required in hostile environments involving chemical, thermal, and mechanical stress. Additionally, the enhanced purity of Teflon ® PFA 945HP Plus makes it suitable for applications that require improved color, lower extractable fluorides, and freedom from other foreign materials. This product contains no additives and is designed for hostile chemical environments where purity in the parts-per-billion range is needed. Examples are in semiconductor manufacture, fluid handling systems for industry or life sciences, and instrumentation for precise measurements of fluid systems. Teflon ® PFA 945HP Plus combines the processing ease of conventional thermoplastics with the properties similar to those of polytetrafluoroethylene.
With Teflon ® PFA 945HP Plus, components can last longer under dynamic loads and resist damage caused by ozonated fluids and fluorosurfactants. Combined with excellent chemical, permeation, and stress-crack resistance, this durability leads to a reduced cost of ownership. The high purity and fully fluorinated olecule end groups of Teflon ® PFA HP Plus can reduce contamination to protect process yields.
Properly processed products made from neat Teflon ® PFA 945HP Plus resin provide the superior properties characteristic of fluoroplastic resins: chemical inertness, exceptional dielectric properties, heat resistance, toughness and flexibility, low coefficient of friction, non-stick characteristics, negligible moisture absorption, low flammability, performance at temperature extremes, and excellent weather resistance.
In a flame situation, products of Teflon ® PFA 945HP Plus resist ignition and do not promote flame spread. When ignited by flame from other sources, their contribution of heat is very small and added at a slow rate with very little smoke.
Teflon ® PFA 945HP Plus meets the requirements of ASTM D3307, Type VI
材料特性:Excellent Weather Resistance、纯度高、低摩擦系数、低吸湿性、低烟度、高 ESCR(抗应力开裂)、良好的电气性能、良好的柔韧性、耐化学品良好、耐热中等、热稳定良好、韧性良好、食品接触的合规性、中等流动性、中等透明度
物理性能 额定值 单位制 测试方法
密度/比重 2.14 g/cm³ ASTM D792
熔流率(熔体流动速率)(372℃/5.0 kg) 7.0 g/10 min ASTM D3307,ISO 12086
吸水率(24 hr) < 0.030 % ASTM D570
硬度 额定值 单位制 测试方法
肖氏硬度(邵氏 D) 55   ASTM D2240,ISO 868
机械性能 额定值 单位制 测试方法
抗张强度     ASTM D3307,ISO 12086
23℃ 28.3 MPa
200℃ 13.1 MPa
伸长率     ASTM D3307,ISO 12086
断裂,23℃ 290 %
断裂,200℃ 450 %
弯曲模量     ASTM D790,ISO 178
23℃ 600 MPa
200℃ 55.2 MPa
热性能 额定值 单位制 测试方法
熔融温度 290 ASTM D4591
电气性能 额定值 单位制 测试方法
体积电阻率 1.0E+18 ohms·cm ASTM D257,ISO 1325
0.250 mm,方法A(短时间) 80 kV/mm ASTM D149
0.250 mm 80 kV/mm IEC 60243-1
介电常数(1 MHz) 2.03   ASTM D150,IEC 60250
耗散因数(1 MHz) < 2.0E-4   ASTM D150,IEC 60250
可燃性 额定值 单位制 测试方法
UL 阻燃等级1 V-0   UL 94
极限氧指数 > 95 % ASTM D2863,ISO 4589-2
补充信息 额定值 单位制 测试方法
Critical Shear Rate(372℃) 21.0 sec^-1  
MIT Folding Endurance2(200.0 µm) 8.0E+5 Cycles ASTM D2176
1These results are based on laboratory tests under controlled conditions and do not reflect performance under actual fire conditions,current rating is a typical theoretical value.
2Depending on fabrication conditions
Teflon™ PFA 是一种四氟乙烯-全氟烷氧基醚共聚物树脂,可以提供颗粒状和粉末状两种产品形态。这种氟聚合物树脂可以改进很多行业(包括化学加工、电子、半导体、制药和生物技术领域)生产的产品。
Teflon™ PFA 树脂的特性和优势
Teflon™ PFA 树脂可以用传统的热熔挤出工艺或注塑、压塑、滚塑成型、传递成型和吹塑工艺进行加工。Teflon™ PFA 树脂的熔体强度和热稳定性很高,有利于采用较大的模具孔和高温涂布工艺,从而提高加工速度。
这种树脂结合了传统热塑性树脂的易加工优势和 Teflon™ PTFE(聚四氟乙烯)的出色性能,包括:
⠐ 出色的耐化学腐蚀性
⠐ 卓越的电气性能
⠐ 高达 260℃ (500°F) 的连续工作温度
⠐ 强大的耐高温蠕变性能
⠐ 出色的低温韧性
⠐ 出色的阻燃性
Teflon™ PFA 产品系列
Teflon™ PFA 产品系列包括各种熔体流动速率 (MFR) 的树脂等级产品,这些产品适用于各种热塑成型工艺,包括管和薄膜挤出成型、注塑、传递成型、压塑成型和吹塑成型工艺。还可以提供用作涂层、薄膜或弥散材料的 PFA 产品。
Teflon™ PFA 300 系列
⠐ Teflon™ PFA 300 系列树脂是通用型 PFA 树脂,适用于模压或挤塑等热塑性成型工艺
Teflon™ PFA 400HP 系列
⠐ 完全氟化的 Teflon™ PFA 400HP 系列树脂专为满足化学流体处理行业对高纯度和最小萃取量的要求而设计。
⠐ Teflon™ PFA HP 氟聚合物树脂制成的组件具有出色的耐化学腐蚀性和耐环境应力开裂性。这种树脂几乎不受任何化学品和溶剂的影响。
Teflon™ PFA 900HP Plus 系列
⠐ Teflon™ PFA 900HP Plus 氟聚合物树脂具有与 Teflon™ PFA HP 等级产品一样出色的耐化学腐蚀性、高纯度和防离子污染性能,并且具有更长的抗挠曲寿命和更好的耐化学应力开裂性能。此外,这种树脂还赋予产品更高透明度和更好的表面光洁度,便于观察在水处理系统中的杂质并防止微生物在表面积聚。
⠐ 这种树脂能够提供更稳定可靠,无杂质污染以及耐含氟表面活性剂等特性,满足于半导体制造加工过程中日益严苛的要求。
Teflon PFA